China OEM 2d Vision Measuring Machine Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli
China OEM 2d Vision Measuring Machine Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli Detail:
Product Video
Introduction
PPG-60403ELS-800KG is suitable for measuring the thickness of lithium batteries, automotive power batteries and other non-battery thin products. It uses servo motor to provide pressure, so that the product measurement is more accurate.
Operating steps
The specific measurement steps of the high pressure electric PPG battery thickness gauge are as follows:
1. Turn on the power of the machine
2. The machine returns to the zero position and performs height correction
3. Set the measurement procedure (including setting the required measurement force value, measurement thickness and running speed etc.)
4. Put the product into the test platform
5. Start the test
6. Display test data and export reports
7. Replace the next product to be tested
The Main Accessories
1. Sensor: Open grating encoder.
2. Coating: baking paint.
3. Parts material: steel, 00 grade cyan marble.
4. Housing material: steel, aluminum.
Technical parameters
|
S/N |
Item |
Configration |
|
1 |
Effective test area |
L600mm × W400mm |
|
2 |
Thickness range |
0-30mm |
|
3 |
Working distance |
≥50mm |
|
4 |
Reading resolution |
0.0005mm |
|
5 |
Flatness of marble |
0.005mm |
|
6 |
Measurement error of one position |
Put a PPG standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.02mm. |
|
7 |
Comprehensive measurement error |
Place a PPG standard gauge block between the upper and lower platens, and measure the center point of the platen and the dimensions of the 4 corners. The fluctuation range of the measured value of the center point and the four corners minus the standard value is less than or equal to 0.04mm. |
|
8 |
Test pressure range |
0-800kg |
|
9 |
Pressure method |
Use servo motor to provide pressure |
|
10 |
Work beat |
<30 seconds |
|
11 |
GR&R |
<10% |
|
12 |
Transfer method |
Linear guide, screw, servo motor |
|
13 |
Power |
AC 220V 50HZ |
|
14 |
Operating environment |
Temperature：23℃±2℃ Humidity：30～80% |
|
Vibration：＜0.002mm/s，＜15Hz |
||
|
15 |
Weigh |
350kg |
|
16 |
***Other specifications of the machine can be customized. |
|
Pictures of the device
Product detail pictures:
Related Product Guide:
We have state-of-the-art equipment. Our products are exported for the USA, the UK and so on, enjoying a fantastic status among the clients for China OEM 2d Vision Measuring Machine Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli , The product will supply to all over the world, such as: St. Petersburg, Benin, Nepal, Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Caroline from Philadelphia - 2017.06.19 13:51
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Rita from Malaysia - 2017.06.25 12:48
