Optical Measurement Systems Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli
Optical Measurement Systems Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli Detail:
Product Video
Introduction
PPG-60403ELS-800KG is suitable for measuring the thickness of lithium batteries, automotive power batteries and other non-battery thin products. It uses servo motor to provide pressure, so that the product measurement is more accurate.
Operating steps
The specific measurement steps of the high pressure electric PPG battery thickness gauge are as follows:
1. Turn on the power of the machine
2. The machine returns to the zero position and performs height correction
3. Set the measurement procedure (including setting the required measurement force value, measurement thickness and running speed etc.)
4. Put the product into the test platform
5. Start the test
6. Display test data and export reports
7. Replace the next product to be tested
The Main Accessories
1. Sensor: Open grating encoder.
2. Coating: baking paint.
3. Parts material: steel, 00 grade cyan marble.
4. Housing material: steel, aluminum.
Technical parameters
|
S/N |
Item |
Configration |
|
1 |
Effective test area |
L600mm × W400mm |
|
2 |
Thickness range |
0-30mm |
|
3 |
Working distance |
≥50mm |
|
4 |
Reading resolution |
0.0005mm |
|
5 |
Flatness of marble |
0.005mm |
|
6 |
Measurement error of one position |
Put a PPG standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.02mm. |
|
7 |
Comprehensive measurement error |
Place a PPG standard gauge block between the upper and lower platens, and measure the center point of the platen and the dimensions of the 4 corners. The fluctuation range of the measured value of the center point and the four corners minus the standard value is less than or equal to 0.04mm. |
|
8 |
Test pressure range |
0-800kg |
|
9 |
Pressure method |
Use servo motor to provide pressure |
|
10 |
Work beat |
<30 seconds |
|
11 |
GR&R |
<10% |
|
12 |
Transfer method |
Linear guide, screw, servo motor |
|
13 |
Power |
AC 220V 50HZ |
|
14 |
Operating environment |
Temperature：23℃±2℃ Humidity：30～80% |
|
Vibration：＜0.002mm/s，＜15Hz |
||
|
15 |
Weigh |
350kg |
|
16 |
***Other specifications of the machine can be customized. |
|
Pictures of the device
Product detail pictures:
Related Product Guide:
Our corporation has been specializing in brand strategy. Customers' gratification is our greatest advertising. We also source OEM company for Optical Measurement Systems Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli , The product will supply to all over the world, such as: United Arab Emirates, Peru, Lithuania, Our company, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by iso9000 quality management standard strictly , creating top-ranking company by spirit of progress-marking honesty and optimism.
By Raymond from Sao Paulo - 2017.08.16 13:39
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Hannah from New York - 2017.05.02 11:33
