Thickness Gauge Company – PPG-20153M (The manual type PPG thickness gauge) – Chengli
Thickness Gauge Company – PPG-20153M (The manual type PPG thickness gauge) – Chengli Detail:
Technical parameters
|
S/N |
Item |
Configration |
|
1 |
Effective test area |
L200mm × W150mm |
|
2 |
Thickness range |
0-30mm |
|
3 |
Working distance |
≥50mm |
|
4 |
Reading resolution |
0.001mm |
|
5 |
Flatness of marble |
0.003mm |
|
6 |
Measurement error of one position |
Put a 5mm standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.003mm. |
|
7 |
Comprehensive measurement error |
A 5mm standard gauge block is placed between the upper and lower pressure plates, and the 9 points evenly distributed in the pressure plate are measured. The fluctuation range of the measured value of each test point minus the standard value is less than or equal to 0.01mm. |
|
8 |
Test pressure range |
500-2000g |
|
9 |
Pressure transmission mode |
Use weights to pressurize |
|
10 |
Sensor |
Altitude dial indicator |
|
11 |
Operating environment |
Temperature：23℃±2℃ Humidity：30～80% |
|
Vibration：＜0.002mm/s，＜15Hz |
||
|
12 |
Weigh |
40kg |
|
13 |
***Other specifications of the machine can be customized. |
|
Product Description
PPG Lithium Battery Thickness Gauge is a series of instruments developed by Chengli Company for the requirements of customers in the new energy industry to rapidly detect battery thickness under specific pressure. It overcomes the problems of unstable pressure, poor adjustment of the parallelism of the splint, and low measurement accuracy when measuring the thickness of lithium batteries on the market. This series of instruments has fast measurement speed, stable pressure and adjustable pressure value, which greatly improves the measurement accuracy, stability and measurement efficiency.
Introduction
The PPG is suitable for measuring the thickness of lithium batteries, as well as measuring other non-battery thin products. It uses weights for counterweight, so that the test pressure range is 500-2000g.
Operating steps
2.1 Put the battery into the test platform of the thickness measuring machine;
2.2 Lift the test pressure plate, so that the test pressure plate naturally presses down for testing;
2.3 After the test is completed, lift the test press plate;
2.4 Remove the battery until the whole test step is completed.
The main accessories of the equipment
3.1.Sensor: Altitude dial indicator.
3.2.Coating: Stoving varnish.
3.3.Material of parts: steel, grade 00 jinan blue marble.
3.4.Cover material: Steel and aluminum.
Power Supply
AC220V/50HZ
AC110V/60HZ
Product detail pictures:
Related Product Guide:
Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for Thickness Gauge Company – PPG-20153M (The manual type PPG thickness gauge) – Chengli , The product will supply to all over the world, such as: Philippines, Seychelles, Cancun, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By Judy from Sydney - 2017.05.02 18:28
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Ivy from Luxembourg - 2018.11.04 10:32
