Vmm Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli

Short Description:

Send email to us

Product Detail

Product Tags

Feedback (2)

The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Fully-Automatic Coordinate Measuring Machine, Fully-Automatic Vision Measuring Machine With Laser, Manual Video Measuring Machine, Clients to start with! Whatever you require, we should do our utmost to aid you. We warmly welcome prospects from everywhere in the entire world to cooperate with us for mutual enhancement.

Vmm Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli Detail:

Product Video

Introduction

PPG-60403ELS-800KG is suitable for measuring the thickness of lithium batteries, automotive power batteries and other non-battery thin products. It uses servo motor to provide pressure, so that the product measurement is more accurate.

Operating steps

The specific measurement steps of the high pressure electric PPG battery thickness gauge are as follows:

1. Turn on the power of the machine

2. The machine returns to the zero position and performs height correction

3. Set the measurement procedure (including setting the required measurement force value, measurement thickness and running speed etc.)

4. Put the product into the test platform

5. Start the test

6. Display test data and export reports

7. Replace the next product to be tested

The Main Accessories

1. Sensor: Open grating encoder.

2. Coating: baking paint.

3. Parts material: steel, 00 grade cyan marble.

4. Housing material: steel, aluminum.

Technical parameters

S/N	Item	Configration
1	Effective test area	L600mm × W400mm
2	Thickness range	0-30mm
3	Working distance	≥50mm
4	Reading resolution	0.0005mm
5	Flatness of marble	0.005mm
6	Measurement error of one position	Put a PPG standard gauge block between the upper and lower pressure plates, repeat the test 10 times at the same position, and its fluctuation range is less than or equal to 0.02mm.
7	Comprehensive measurement error	Place a PPG standard gauge block between the upper and lower platens, and measure the center point of the platen and the dimensions of the 4 corners. The fluctuation range of the measured value of the center point and the four corners minus the standard value is less than or equal to 0.04mm.
8	Test pressure range	0-800kg
9	Pressure method	Use servo motor to provide pressure
10	Work beat	<30 seconds
11	GR&R	<10%
12	Transfer method	Linear guide, screw, servo motor
13	Power	AC 220V 50HZ
14	Operating environment	Temperature：23℃±2℃ Humidity：30～80%
14	Operating environment	Vibration：＜0.002mm/s，＜15Hz
15	Weigh	350kg
16	***Other specifications of the machine can be customized.

Pictures of the device

semi-automatic lithium battery thickness gauge
semi-automatic thickness gauge

Product detail pictures:

Related Product Guide:

Always customer-oriented, and it's our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for Vmm Products – PPG-60403ELS-800KG Automotive power battery thickness measuring machine – Chengli , The product will supply to all over the world, such as: Indonesia, Zambia, Croatia, Taking the core concept of "to be the Responsible". We will redound up on society for high quality products and good service. We will initiative to participate in international competition to be a first- class manufacturer of this product in the world.

Automatic Vision Measuring Machine With Laser & Probe