Fully-automatic Vision Measuring Systems Supplier

Short Description:

FA series non-contact 3D video measurement system adopts cantilever structure, which is simple and convenient to operate. It is an upgraded version of the EA series. Its X, Y, and Z axes are all driven by linear guides and screw rods, with higher precision and more accurate machine positioning. The Z axis can be equipped with lasers and probes for 3D dimension measurement.

Product Detail

Product Tags

Product Video

Parameters & Features




X/Y/Z measurement stroke



Z axis stroke

Effective space: 200mm, working distance: 90mm

XYZ axis base

X/Y mobile platform:Grade 00 cyan marble

Z axis column: square steel

Machine base

Grade 00 cyan marble

Size of glass countertop 



Size of marble countertop



Bearing capacity of glass countertop


Transmission type

X/Y/Z axis: Hiwin P-grade linear guides

and C5 grade ground ball screw

Optical scale resolution


X/Y linear measurement accuracy (μm)



Repetition accuracy (μm)




Hikvision 1/2″ HD color industrial camera


Self-developed automatic zoom lens

optical magnification: 0.6X-5.0X

image magnification: 30X-300X

Image system

Image software: it can measure points, lines, circles, arcs, angles, distances, ellipses, rectangles, continuous curves, tilt corrections, plane corrections, and origin setting. The measurement results display the tolerance value, roundness, straightness, position and perpendicularity. The degree of parallelism can be directly exported and imported into Dxf, Word, Excel, and Spc files for editing which is suitable for batch testing for customer report programming. At the same time, part of and the entire product can be photographed and scanned, and the size and image of the entire product can be recorded and archived, then the dimensional error marked on the picture is clear at a glance.
Image card: intel gigabit network video capture card

Illumination system

Continuously adjustable LED light (Surface illumination +contour illumination), with lower heating value and long service life

Overall dimensionL*W*H





Power supply

AC220V/50HZ AC110V/60HZ


Intel i5+8g+512g


Philips 27 inches


1 year warranty for the whole machine

Switching power supply

Mingwei MW 12V/24V

Environment of Instrument

1. Temperature and humidity 

Temperature: 20-25℃, optimal temperature: 22℃; relative humidity: 50%-60%, optimal relative humidity: 55%; Maximum temperature change rate in the machine room: 10℃/h; It is recommended to use a humidifier in dry area, and use a dehumidifier in humid area.

2. Heat calculation in the workshop 

·Keep the machine system in the workshop operating in the optimum temperature and humidity, and the total indoor heat dissipation must be calculated, including the total heat dissipation of indoor equipment and instruments (lights and general lighting can be ignored) 

·Heat dissipation of human body: 600BTY/h/person 

·Heat dissipation of workshop: 5/m2

·Instrument placement space (L*W*H): 2M ╳ 2M ╳ 2M

3Dust content of air 

The machine room shall be kept clean, and the impurities greater than 0.5MLXPOV in the air shall not exceed 45000 per cubic foot. If there is too much dust in the air, it is easy to cause resource read and write errors and damage to the disk or read-write heads in the disk drive.

4Vibration degree of machine room

The vibration degree of machine room shall not exceed 0.5T. Machines that vibrate in the machine room shall not be placed together, because the vibration will loosen the mechanical parts, joints and contact parts of the host panel, resulting in abnormal operation of the machine.

Power Supply



  • Previous:
  • Next:

  • Write your message here and send it to us